AIR GAP AND SLIP OF THE WHEEL SENSOR (RIGHT, FRONTWARD) [DTC CODE: P0208, MALFUNCTION CODE: 3-1 (2)]

1. Tuck the wheel sensor until it contacts the sensor ring.
   
   

   

   
   • Do not use a hammer to tuck the wheel sensor.
   • To avoid damage, do not pry with a screwdriver or other similar tools.
     
     
2. If the same code is indicated again after a while of inspection, inspect the clamping bushing for abnormalities and the sensor ring for runout. Make replacement if some abnormalities are found.
   
   

   

   
   
   • If sensor ring tooth spaces are clogged, use a brush to clean them.

1. Confirm the DTC P0208 is inactive

   • Start the engine and let it idling condition.
   • Verify the DTC P0208 is inactive.

   

2. DTC Clear

   • Clear the DTC with Hino DX
   • Confirm the same DTC is not reoccurred

   

P0208 is reoccur: Return to first process Other DTC appear: Refer to concerned Trouble shooting

Complete